M5 AtomS3 Motion Face

Install in your browser

Flash AtomS3 Motion Face onto an M5Stack AtomS3 (the one with the display and the MPU6886 motion sensor) straight from Chrome or Edge on a computer - no tools to install.

  1. Connect the AtomS3 with a USB-C data cable.
  2. Press Install and choose the serial port ("USB JTAG/serial" or "USB Serial").
  3. If no port shows: hold the AtomS3 button, plug in USB, release, and try again.
  4. Wait about 20 seconds. When it finishes, shake the device!
Your browser does not support Web Serial. Use Chrome or Edge on a desktop computer. Web Serial needs HTTPS - open this page from GitHub Pages.

Controls: click the screen = next character, hold = change colour.

Other ways to install (esptool, PlatformIO, M5Burner): see the flashing guide.